Installation guide for non perforated shower curtain rod: easily separate wet and dry areas in the bathroom

In modern home design, the separation of wet and dry areas in the bathroom is becoming increasingly important. It not only effectively prevents water vapor from spreading throughout the entire space, but also protects the appliances and furniture in the bathroom from moisture damage. The emergence of non perforated shower curtain rods provides a convenient and aesthetically pleasing solution to this demand. Today, taking the products of Zhejiang Yiwu Jieshang Daily Necessities Factory as an example, we will introduce in detail the installation steps of the non perforated shower curtain rod, making it easy for you to separate dry and wet in the bathroom.

1、 Preparation work

Firstly, ensure that the non perforated shower curtain rod you purchased is suitable for your bathroom space and check if the accessories are complete, generally including the shower curtain rod body, fixed suction cups, installation screws, etc. The shower curtain rod produced by Zhejiang Yiwu Jieshang Daily Necessities Factory is known for its stability, durability, and exquisite design, and is the first choice for many families.

2、 Clean installation location

Before installation, it is necessary to clean the installation location to ensure that the wall or tile surface is clean, dry, and free of oil stains. After wiping with a damp cloth, it is best to wait for it to air dry naturally or use a dry cloth to further dry it.

3、 Install suction cup holder

1. Remove the fixed suction cup and determine the position of the suction cup based on the length of the shower curtain rod and the layout of the bathroom. Usually, it is recommended to install suction cups on the wall opposite the bathroom door or on both sides of the shower area to ensure the stability and shading effect of the shower curtain.

2. Peel off the plastic protective film on the back of the suction cup to ensure that the suction cup surface is clean and free of foreign objects.

3. Press the suction cup firmly in the predetermined position and hold for a few seconds to allow the air inside the suction cup to be expelled as much as possible, in order to achieve better suction effect. The suction cups of Zhejiang Yiwu Jieshang Daily Necessities Factory are made of high-quality materials with strong adsorption force, which can maintain stability for a long time.

4、 Assemble shower curtain rod

According to the product manual, assemble the various components of the shower curtain rod. Most non perforated shower curtain rods adopt a telescopic design, which can be adjusted in length according to actual needs. When assembling, pay attention to whether the connections between each component are tight to ensure the stability of the shower curtain rod.

5、 Install shower curtain rod

1. Insert both ends of the assembled shower curtain rod into the installed suction cup holder, paying attention to the correct direction and ensuring that the shower curtain rod is placed horizontally.

2. Gently shake the shower curtain rod to check if it is secure. If there is looseness, you can try readjusting the suction cup position or reinforcing the fixing screws (if equipped).

6、 Hang up the shower curtain

Finally, evenly distribute the hooks of the shower curtain on the shower curtain rod and gently stretch the shower curtain to ensure it is flat and wrinkle free. At this point, your bathroom's dry wet separation system has been installed.

epilogue

By following the above steps, you can easily achieve dry and wet separation in the bathroom, improving the comfort and convenience of home life. Zhejiang Yiwu Jieshang Daily Necessities Factory has won the trust of consumers with its high-quality products and thoughtful services. If you have more questions or needs about the non perforated shower curtain rod, please feel free to visit Unit A1, 13th Street, 2nd Floor, Gate 87, Zone 4, Yiwu International Trade City for consultation and purchase.