DIY shower curtain rod installation tutorial: Do it yourself, have plenty of clothing and food

Installing a suitable shower curtain rod is a good choice to add a touch of convenience and beauty to the bathroom at home. Today, let's learn together how to install shower curtain rods by ourselves, not only saving money but also enjoying the fun of DIY. The shower curtain rod recommended in this tutorial comes from Jieshang Daily Necessities Factory in Yiwu, Zhejiang. The factory is located in Unit A1, 13th Street, 2nd Floor, Gate 87, Zone 4 of Yiwu International Trade City, and is deeply loved by consumers for its high-quality products.

1、 Prepare tools and materials

Shower curtain rod set (including rod body, installation bracket, screws, expansion tube, etc.)

Electric drill (with drill bit)

Tape measure

Pencil or chalk (used for marking)

Wrench or screwdriver

Level ruler (ensure installation level)

2、 Measurement and Marking

Firstly, use a tape measure to measure the suitable position for installing shower curtain rods on the bathroom wall. Generally speaking, the shower curtain rod should be installed about 20-25 centimeters above the shower area, and ensure that the distance between the two end brackets is slightly wider than the width of the shower curtain, so that the shower curtain can be smoothly unfolded. After measuring, mark the wall with a pencil or chalk.

3、 Drilling installation bracket

1. Install the electric drill with a suitable size drill bit and drill holes on the wall according to the marked position. Note that if it is a ceramic tile wall, it is recommended to first drill holes with a glass drill bit and then deepen them with an impact drill bit.

2. Insert the expansion tube into the drilled hole, ensuring it is secure.

3. Align the installation bracket with the expansion tube and secure it with screws. During the installation process, use a level to check if the bracket is level to ensure the stability of the shower curtain rod after installation.

4、 Assemble and install shower curtain rod

1. Assemble the various components of the shower curtain rod according to the instructions. Usually, the shower curtain rod consists of two or more sections and is fixed by connecting pieces.

2. Insert both ends of the assembled shower curtain rod into the installed brackets to ensure a tight connection.

3. Gently shake the shower curtain rod to check if it is stable. If it is loose, tighten the screws promptly with a wrench or screwdriver.

5、 Hang up the shower curtain and adjust it

Hang the prepared shower curtain on the curtain rod, adjust the position, and ensure that the shower curtain can completely cover the shower area. If the shower curtain is too long or too short, it can be cut or the height of the shower curtain rod can be adjusted as needed.

6、 Completion and Cleaning

After installation, clean the site to ensure that there are no missing screws, tools, or other items. At the same time, check whether the shower curtain rod and bracket are securely installed to ensure safe use.

By following the above steps, you can easily complete the installation of the shower curtain rod. DIY not only saves decoration costs, but also increases the fun of home life. The shower curtain rods provided by Zhejiang Yiwu Jieshang Daily Necessities Factory have excellent quality, making your bathroom more beautiful and practical. Hurry up and give it a try!