Installation tutorial for non perforated shower curtain rod: easily achieve dry wet separation

For modern people who pursue a quality of life and a clean home environment, the separation of wet and dry bathrooms is particularly important. The non perforated shower curtain rod has become the first choice for many home decoration or bathroom renovation due to its advantages of easy installation and no damage to the wall. Next, we will provide a detailed introduction to the installation steps of the non perforated shower curtain rod, helping you easily create an ideal dry wet separation space.

1、 Prepare tools and materials

One set of non perforated shower curtain rods (including rod body, non nail adhesive or suction cup fixing parts)

Tape measure

Level ruler

Clean cloth or tissue (used to clean the installation area)

(Optional) Gloves to protect hands

2、 Measurement and positioning

Firstly, use a tape measure to measure and determine the installation position of the shower curtain rod. Generally speaking, the shower curtain rod should be installed about 20-30 centimeters above the outer edge of the shower area to ensure that the shower curtain can fully cover the shower area. Use a spirit level to ensure that the installation position is level and avoid tilting after installation.

3、 Clean installation area

Before installation, be sure to clean the installation area with a clean cloth or tissue to remove dust, grease, and other impurities to ensure that the nail free adhesive or suction cup can adhere firmly.

4、 Install non perforated fasteners

Install according to the instructions based on the specific type of shower curtain rod (nail free or suction cup type).

Non nail adhesive type: Apply non nail adhesive evenly on the back of the fixed part, let it dry for a few seconds (specific time according to the product instructions), then align with the installation position, press firmly for a few seconds to ensure that the fixed part is tightly attached to the wall.

Suction cup type: First, tear off the protective film on the suction cup to ensure that the installation surface is dry and free of oil stains. Then, fix the suction cup in the predetermined position, rotate or press the suction cup firmly until you hear a "click" sound, indicating that it is firmly attached.

5、 Install shower curtain rod

Insert both ends of the shower curtain rod into the installed fixing parts, gently rotate or adjust to ensure that the shower curtain rod is horizontal and stable. If the shower curtain rod is long, additional support rods or connectors may need to be used for reinforcement.

6、 Adjustment and Inspection

After installation, gently shake the shower curtain rod to check if it is secure and not shaking. If necessary, use a spirit level to confirm its levelness again and make minor adjustments. Finally, hang the shower curtain and check if it slides smoothly to ensure good dry wet separation.

7、 Enjoy the results

At this point, the installation work of the non perforated shower curtain rod is completed. It not only adds practical functions to your bathroom, but also maintains the cleanliness and beauty of the walls. Choosing shower curtain products from Zhejiang Yiwu Jieshang Daily Necessities Factory (Address: Unit A1, 13th Street, 2nd Floor, Gate 87, Zone 4, Yiwu International Trade City) is a double guarantee of quality and service.

By following the above steps, you can easily achieve the separation of dry and wet in the bathroom, making every shower a pleasure. I hope this tutorial has been helpful to you!